Canon iPF755 User Manual page 688

Printer Parts > Control Panel
Adjust
Print-
er
9
672
Main-
te-
nance
Menu Settings
>
Setting Item
Feed Adj.
Print Length
Priori- Priori-
ty ty
Adj. Auto(GenuinePpr)
Quali-
ty
Auto(OtherPaper)
Manual
Adjust Ad-
Lengt just-
h ment-
Print
Chang
e Set-
tings
Adj. Fine Feed
Head Cleaning
Nozzle Check
Specify this mode with paper identified in the Pa-
per Reference Guide.
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. (See "Auto-
matic Banding Adjustment (Adj. Quality).")
→P.629
Specify this mode with paper not in the Paper Ref-
erence Guide.
The printer prints and reads a test pattern for auto-
matic adjustment of the feed amount. Note that this
function takes more time and consumes more ink
than Auto(GenuinePpr). (See "Automatic Band-
ing Adjustment (Adj. Quality).")
Use this mode with highly transparent media or
other paper for which Auto(GenuinePpr) or Au-
to(OtherPaper) cannot be used.
Print a test pattern for adjustment of the feed
amount based on the type of paper. (See "Manual
Banding Adjustment (Adj. Quality).")
A:High Print a test pattern for particular types of paper to
compensate for paper stretching or shrinkage, after
which you enter the amount of adjustment. (See
"Adjusting Line Length (Adjust Length).")
→P.633
B:Standard/
Draft
A:High Displayed when you have selected Feed Priority >
Adj. Priority > Print Length.
Adjustment relative to the amount of stretching or
shrinkage of the current paper.
Enter either the adjustment results from Adjust-
mentPrint or the discrepancy that you measured
(as a percentage).
For paper that tends to stretch, increase the feed
amount by choosing a higher adjustment value. For
paper that tends to shrink, decrease the feed amount
by choosing a lower adjustment value.
B:Standard/
Draft
Displayed when you have selected Feed Priority >
Adj. Priority > Automatic or Print Quality. Fine-
tune the feed amount manually during printing.
(See "Fine-Tuning the Paper Feed Amount (Adj.
Fine Feed).")
Clean the Printhead. (See "Cleaning the Print-
head.")
Choose Head Cleaning A if printing is faint, oddly
colored, or contains foreign substances.
Choose Head Cleaning B if no ink is printed at all,
or if printing is not improved by Head Cleaning A.
Print a test pattern to check the nozzles.
Description, Instructions
→P.629
→P.633
→P.742
→P.631
iPF755