Keeping Track of the Amount of Roll Paper Left
Setting ManageRemainRoll to On in the Paper Menu of the Control Panel will print a barcode with text on the roll
when the roll is removed that identifies the type of paper and amount left. When ManageRemainRoll is On and you
load rolls with printed barcodes, the type of paper and amount left are automatically detected after rolls are loaded. The
barcode will be cut off after it has been read.
Important
• If the barcode on the roll is not detected, enter the type and length of paper on the Control Panel.
Follow these steps to set ManageRemainRoll to On as follows.
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
Note
• If the Tab Selection screen is not displayed, press the Menu button.
2.
Press the OK button.
The Paper Menu is displayed.
3.
Press ▲ or ▼ to select ManageRemainRoll, and then press the OK button.
4.
Press ▲ or ▼ to select On, and then press the OK button.
Specifying the Ink Drying Time for Rolls
When you are using paper that takes longer for ink to adhere, if the Cutter touches printed surfaces that are still wet, it
may damage the paper or cause rough cut edges. Also, ink may be transferred onto the paper surface during ejection,
soiling it. You can prevent problems by adjusting the drying time after printing before the paper is cut.
Windows
1.
Display the printer driver dialog box.
(See "Accessing the Printer Driver Dialog Box from the Operating System Menu (Windows).")
iPF755
Handling Paper
Keeping Track of the Amount of Roll Paper Left
>
Handling rolls
>
).
7
599
→P.197