The Printer Stops During A Print Job; An Error Message Is Shown On The Display Screen - Canon iPF755 User Manual

The printer stops during a print job

An error message is shown on the Display Screen ................................................................................... 781

The printer ejects blank, unprinted paper .................................................................................................. 781
An error message is shown on the Display Screen
An error message is displayed during printing.
The last portion of roll paper was used during a print
job, and paper could not be advanced because the trail-
ing edge is taped to the roll.
The printer ejects blank, unprinted paper
Status
The leading edge of the roll paper was cut
to straighten it.
The Printhead nozzles are clogged.
A print job was received from an incom-
patible printer driver.
The printer has received print data that in-
cludes HP RTL commands when Auto
Rotate is On in the Control Panel menu.
The printer is damaged.
iPF755
Status
The leading edge of rolls may be cut to straighten it if you have selec-
ted Trim Edge First > On or Automatic in the Control Panel menu.
(See "Cutting the Leading Edge of Roll Paper Automatically.")
→P.606
Print a test pattern to check the nozzles and make sure the Printhead is
in good condition for printing.
(See "Checking for Nozzle Clogging.")
Use the correct imagePROGRAF printer driver for the printer and try
printing again.
In the Control Panel, set Auto Rotate to Off and print again.
(See "Menu Settings.")
Contact your Canon dealer for assistance.
Troubleshooting > The printer stops during a print job
Corrective Action
Check the error message and take action as necessary.
(See " Error Messages
→P.802
Remove the used roll and insert a new roll.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
(See "Loading and Printing on Rolls.")
Corrective Action
→P.741
→P.667
An error message is shown on the Display Screen
>
.")
→P.594
→P.597
→P.3
12
781