Canon iPF755 User Manual page 687

HDD Information
*1: Indicates a rough estimate of how much ink was consumed per page. Actual ink consumption may be differ-
ent. The average margin of error for estimates calculated according to Canon measurement conditions for ink
costs is ±15%. Canon does not guarantee the accuracy of these estimates. Estimates may vary depending on
conditions of use. Calculation of these estimates does not include ink consumed when cleaning printheads by
forceful ejection of ink.
Set./Adj. Menu
Test Nozzle Check
Print
Status Print
Interface Print
GL2 Set Print
Paper Details
Print Job Log
Menu Map
Color Palette
Adjust Head Auto(Standard)
Print- Posi.
er Adj.
Auto(Advanced)
Manual
Head Inc. Adj.
Feed Adj.
Priori- Priori-
ty ty
iPF755
Setting Item
Setting Item
Automatic
Print Quality
Printer Parts
Description, Instructions
Indicates the total hard disk capacity and the mail box
free space.
Description, Instructions
Print a test pattern to check the nozzles.
Print information about the printer.
Print interface settings information.
Print GL2 settings information.
Print the paper settings as specified in Paper De-
tails.
Print a record of print jobs, including the paper
type and size, amount of ink consumed, and so on.
Ink consumption indicates a rough estimate of how
much ink was consumed per page.( *1
Print the menu structure.
Print the GL2 color palette.
The printer prints and reads a test pattern for auto-
matic adjustment of Printhead alignment relative to
the printing direction. (See "Automatic Adjust-
ment to Straighten Lines and Colors (Head
Posi. Adj.).")
→P.620
The printer prints and reads a test pattern for auto-
matic adjustment of Printhead alignment relative to
the printing direction and spacing between nozzles
and colors. (See "Automatic Adjustment to
Straighten Lines and Colors (Head Posi. Adj.).")
→P.620
Print a test pattern for adjustment of Printhead
alignment relative to the printing direction. Enter
the adjustment value manually based on the result-
ing pattern. (See "Manual Adjustment to Straight-
en Lines and Colors (Head Posi. Adj.).")
→P.622
Print a test pattern for adjustment of the Printhead
orientation. (See "Adjusting Line Misalignment
(Head Inc. Adj.).")
→P.624
Specify exact paper feeding, if desired. Normally,
select Automatic. Choose Print Quality for attrac-
tive printing. Choosing Print Quality also makes
banding less noticeable. Choose Print Length if
you prefer to feed the paper an exact amount. How-
ever, note that slight banding may occur in the di-
rection of carriage scanning when Print Length is
selected.
> Control Panel >
)
→P.679
9
671
Menu Settings