Canon iPF755 User Manual page 689

Main-
Replace P.head
te-
nance
Repl. maint cart
Head Info
GL2 Quali- Color
Set- ty Mode
tings Man-
ager
Print Quality
Input Resolution
Print (Economy)
Paper Paper Source
Man-
Margin
ager
Conserve Paper
Auto Rotate
Nest-
ing
iPF755
Setting Item
Monochrome
Color (CAD) 1
Color (CAD) 2
Color (CAD) 3
Color (CAD) 4
Color (CAD) 5
Use Nesting
Nesting WaitTime
Printer Parts
Description, Instructions
When replacing the Printhead, choose Yes and fol-
low the instructions on the screen. (See "Replac-
ing the Printhead.")
→P.743
Not displayed during a warning message that the
remaining Maintenance Cartridge capacity is low.
When replacing the Maintenance Cartridge, choose
Yes and follow the instructions on the screen. (See
"Replacing the Maintenance Cartridge.")
→P.750
Indicates information about the printhead.
Print in monochrome.
Print in standard colors.
Print in brighter colors.
Print emulating the following printers, in colors re-
sembling colors produced by these printers: Canon
BJ-W3000/W3050.( *2
→P.679
Print emulating the HP Designjet 500/800, in col-
ors resembling colors produced by these printers.
( *2 )
→P.679
Print emulating the HP Designjet 1000, in colors
resembling colors produced by this printer.
( *2 )
→P.679
Choose the print quality.
Choose the printer input resolution, 600dpi or
300dpi.
Although printing quality is diminished, less ink is
consumed than in regular printing. Select On to
conserve ink.
Choose the source of paper for HP-GL/2 printing.
Specify the margin around paper. The margin for
the trailing edge of sheets is 23 mm (0.9 in).
However, if you have specified the leading margin
in Paper Details, the value in Paper Details has
priority.
Conserves paper when printing.
If the long side of an original is shorter than the roll
width, the original is automatically rotated 90 de-
grees to conserve paper. Similarly, if the long side
of an original in landscape orientation is longer
than the roll width and the short side is shorter than
the roll width, the original is repositioned to fit on
the paper.
HP RTL print jobs are not rotated. Because HP
RTL images are not rotated even if the paper is ro-
tated 90 degrees, images may be cut off or the
blank paper may be ejected. In this case, set Auto
Rotate to Off.
Selecting On will store print jobs until multiple
documents can be arranged to fill up the roll width,
instead of printing each print job as it is received.
Specify a time to wait until printing, as desired.
> Control Panel >
)
673
Menu Settings
9