Network Setting (Mac Os X) - Canon iPF755 User Manual

Network Setting

Network Setting (Mac OS X)

Configuring the Printer Driver Destination ................................................................................................ 726
Configuring the Printer's AppleTalk Network Settings ............................................................................... 726
Configuring the Destination for AppleTalk Networks ................................................................................ 727
Configuring the Destination in TCP/IP Networks ...................................................................................... 729
Configuring the Destination for Bonjour Network ..................................................................................... 731
Configuring the Printer Driver Destination
Specify the printer driver destination as follows if the printer's IP address is changed, or if you will use the printer over
a network connection instead of via USB connection.
• If you switch to printing in a TCP/IP network, or if the printer's IP address is changed, see "Configuring the Desti-
nation in TCP/IP Networks ."
• If you switch to printing in a Bonjour network, see "Configuring the Destination for Bonjour Network ."
→P.731
Configuring the Printer's AppleTalk Network Settings
Follow the steps below to configure the AppleTalk network settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
10
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Network in the Device Manager menu at left to display the Network page.
5.
Click Edit in the upper-right corner of the AppleTalk group to display the Edit AppleTalk Protocol Settings
page.
6.
Refer to the AppleTalk Settings Items table to complete the settings.
AppleTalk Settings Items
726
Item
Phase
Type
Name
(*1)
Zone (*2)
Configuring the Printer Driver Destination
> Network Setting (Mac OS X)
→P.729
Specify whether to use AppleTalk.
If you will use AppleTalk, choose Phase 2.
If you will not use AppleTalk, choose Disabled.
Specify the object name used by AppleTalk (in up to 31 single-byte or 15 double-
byte characters).
However, do not use the following single-byte characters: @, *, :, and =.
Specify the printer zone name, up to 31 single-byte characters.
However, do not use the following single-byte characters: Also avoid using *
(which represents the default zone) in the middle of a string.
>
Details Default Setting
Disabled
Canon
NB-18GB
(xxxxxx)
*
iPF755