Canon iPF755 User Manual page 735

5.
Select the IPv4 tab. In IP Address, enter the IP address assigned to the printer, and then enter the subnet mask
in Subnet Mask and the default gateway in Gateway Address.
Important
• You must specify the IP address here to be able to configure NetWare protocol settings using Re-
moteUI.
6.
Click Set.
7.
Click OK after the Confirmation message is displayed.
8.
Exit imagePROGRAF Device Setup Utility.
Specifying the frame type using the printer Control Panel
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Settings/Adj. tab (
iPF755
Network Setting > Network Setting (Windows)
Specifying the Printer's Frame Type
>
10
719
).