Specifying Printer-Related Information - Canon iPF755 User Manual

7.
Click OK to display the Network page.
Note
• If you are using a DNS server, select Enable DNS Dynamic Update and enter the IP Address for DNS
servers and DNS domain name in Primary DNS Server Address, Secondary DNS Server Address and
DNS Domain Name, respectively.

Specifying Printer-Related Information

Follow the steps below to specify device information and security settings.
1.
Start the web browser and enter the following URL in the Location (or Address ) box to display the RemoteUI
page.
http://printer IP address or name/
Example: http://xxx.xxx.xxx.xxx/
2.
Select Administrator Mode and click Logon.
3.
If a password has been set on the printer, enter the password.
4.
Click Information in the Device Manager menu at left to display the Information page.
5.
To display the relevant settings page, click Edit in the upper-right corner of Device Information or Security,
depending on what information you want to specify.
To change the administrator password, click the Change Password button in the Security group.
6.
Refer to the table of settings for device information and security as you complete these settings.
Security setting items are displayed when you click the Change Password button in the Security group.
Device Information Settings
Item
Device Name
Location
Administrator
Phone
Comments(E-mail)
Security Settings
Item
New Password Enter the new password.
(0-9999999)
Confirm Enter the new password again to confirm it.
(0-9999999)
On the Security settings screen, besides entering a password, you can specify other security-related information,
such as IP address-based SNMP or TCP usage restrictions, MAC address-based access restrictions, or IPP
and FTP authentication settings.
iPF755
Details
Enter a device name.
(0–32 characters)
Enter the location where the device is installed.
(0–32 characters)
Enter the administrator's name.
(0–32 characters)
Enter the administrator's contact information.
(0–32 characters)
Enter any comments regarding the administrator.
(0–32 characters)
Details
Network Setting
Default Setting
blank
blank
blank
blank
blank
Default Setting
blank
blank
Specifying Printer-Related Information
> Network Setting >
10
711