Paprwidth Mismatch; Paper Size Not Detected - Canon iPF755 User Manual

Hide thumbs Also See for iPF755:
Table of Contents

Advertisement

Error Message
>
"Remove paper and check pap. size"
A sheet has come out of the printer during printing.

PaprWidth Mismatch

When Detect Mismatch in the Control Panel
menu is set to Pause or Warning, the width of
the loaded roll does not match the width specified
in Fit Roll Paper Width in the printer driver.
13
806

Paper size not detected.

Paper has been loaded askew, or warped paper has been loaded.
PaprWidth Mismatch
Messages regarding paper
>
Cause
Cause
Cause
Corrective Action
1.
Press the Release Lever back and remove the paper.
2.
Reload the sheet, aligning it with the guide on the right.
3.
Pull the Release Lever forward.
4.
If "Not finished printing. Finish printing remaining
jobs?" is shown on the Display Screen, press the OK but-
ton.
Printing will resume, starting from the page on which the
error occurred.
(See "Loading Sheets in the Printer.")
Corrective Action
Press ▲ or ▼ to select Print, and then press the OK button to
resume printing.
However, note that this error may cause paper jams and affect
the printing quality.
Press ▲ or ▼ to select Stop Printing, and then press the OK
button.
Follow these steps to replace the roll to match the width speci-
fied in the printer driver.
1.
Press ▲ or ▼ to select Change Paper, and then press the
OK button.
(See "Removing the Roll from the Printer.")
(See "Removing the Roll Holder from Rolls.")
2.
Replace the paper with paper compatible for borderless
printing.
(See "Attaching the Roll Holder to Rolls.")
(See "Loading Rolls in the Printer.")
The printer now starts printing the print job.
Make sure the roll width selected in the dialog box displayed
when you select Fit Roll Paper Width in the printer driver
matches the width of the roll loaded in the printer, and then try
printing again.
Follow these steps to reload the roll.
1.
Push the Release Lever back.
2.
Adjust the right edge of the roll to make it
parallel to the orange Paper Alignment
Line.
3.
Pull the Release Lever forward.
→P.609
→P.594
→P.597
→P.585
→P.588
Corrective Action
iPF755

Advertisement

Table of Contents
loading

Table of Contents