Changing The Type Of Paper - Canon iPF755 User Manual

Handling Paper
8.
Holding it at the positions indicated, close the Roll Cover.
7

Changing the Type of Paper

Follow these steps to change the type of paper specified on the printer after you have loaded paper.
If you will continue using this type of paper later, selecting Keep Paper Type > On will save the time and effort of
configuring the media type setting when you load the paper again. The current media type settings before you select On
will be automatically selected at that time. (See "Using the Same Type of Paper Regularly.")
Important
• For best printing results, the printer fine-tunes the feed amount for each type of paper. Be sure to select
the type of paper to use correctly before printing.
• Because the printer fine-tunes the feed amount for each type of paper, the margins and the size of printed
images may vary depending on the type of paper used. If margins and the size of images are not as you
expected, adjust the paper feed amount.
(See "Adjusting the Feed Amount.")
Changing the Type of Paper
Note
• After you load a roll, the printer automatically shows a menu for selection of the type of paper on the
592
Display Screen. Select the type of paper and press the OK button.
If no barcode has been printed on the roll and you have set ManageRemainRoll to On, specify the roll
length after the type of paper. (See "Specifying the Paper Length.")
1.
On the Tab Selection screen of the Control Panel, press ◀ or ▶ to select the Paper tab (
Changing the Type of Paper
> Handling rolls >
Note
• For details on types of paper to select, see the Paper Reference Guide. (See "Types of Paper.")
→P.579
Note
• Cut the edge of the roll after the paper is advanced if it is soiled or if there are cuts from scissors
or the blade after removing creased edges. (See "Specifying the Cutting Method for Rolls.")
→P.602
→P.628
→P.593
→P.594
).
iPF755