Clerk Report - Sam4s ER-655II Operation Manual

Clerk Report

The Clerk Report selection allows you to reprogram the descriptors that appear with the Clerk
Report totals and counters. For example, the first total on the clerk report "NET SALES"
might be re-labeled to say "GROSS SALES". You can reprogram any of the Financial
Report totals listed here with any 12-character descriptor.
208  Program Mode Programming
1. From the LOGO DESC. PROGRAM screen, press 4 to display the CLERK
REP MESG. Screen:
CLERK REP MESG. 
TTL 1 :
NET SALE
TTL 2 :
NONTAX
TTL 3 :
TAX1 SALES
2. The first 3 report descriptors (TTLs 1-3) display with the cursor arrow pointing at
the first message. Using the alpha numeric keyboard overlay, type the descriptor.
Each descriptor can be up to 12 characters. If you make a mistake, press the
BACKSPACE key to erase the previous character. After you have completed
typing the first descriptor, press ENTER to accept the new message and advance
to the TTL, or press ESC to return to the LOGO DESC. PROGRAM screen
without making any changes.
3. Press ENTER repeatedly, or press PAGE UP and/or PAGE DOWN to locate
the next descriptor you wish to program. After the last item on each screen, the
screen shifts to display the next 3 descriptors. (There are 52 Clerk Report
descriptors that you can program.) Using the same procedure, continue
programming each line as necessary. Press ESC at any time to exit and return to
the LOGO DESC. PROGRAM screen.

SAM4s ER-655II v1.2