VALIDATE
VALIDATE Key Program Notes
Option
DESC
SLIP OUTPUT
COMM PORT # (0-2)
KEY DISABLE
ALLOW MULTIPLE
VALID?
200 Program Mode Programming
1. Press the VALIDATE key to view the validate function key options:
VALID KEY PROG.
DESC : VALIDATION
SLIP OUTPUT
COM PORT #(0-2)
KEY DISABLE
ALLOW MULTIPLE
VALID?
2. Press ENTER from the last field to return to the FUNCTION KEY
PROGRAM screen, or press ESC at any time to return to the FUNCTION
KEY PROGRAM screen without saving changes.
Entry
Description
Alpha
You can program a descriptor. The default descriptor is
numeric
VALIDATION.
12 character
0, 1, or 2
If validation is used, identify the communications port (1 or 2)
where the validating printer is attached. Enter 0 if validation is not
used.
Y or N
Select Y to disable this function.
Y or N
Select Y to allow multiple validations of the same transaction.
0
N
N
SAM4s ER-655II v1.2