Delete Plu - Sam4s ER-655II Operation Manual

Delete PLU

Note: To delete a PLU, all totals for the PLU must be cleared from Z reports (including
Stock and PLU reports.)
122  Program Mode Programming
1. From the PLU PROGRAMMING screen, press 1 to display the DELETE PLU
screen:
0. DELETE ONE PLU
1. DELETE PLU RANGE
2. Press 0 to delete an individual PLU. The PLU NUMBER screen displays:
 ENTER PLU NUMBER
AND PUSH PLU, OR
 PRESS A PLU KEY ON
THE KEYBOARD
3. Enter the number of the PLU you wish to delete, or press a PLU key on the
keyboard, or press modifier key followed by a the PLU key on the keyboard.
The CONFIRM DELETE screen displays:
CONFIRM DELETE
ARE YOU SURE YOU
WISH TO DELETE PLU#
??????????????
4. Press ENTER to delete the PLU; press ESC to return to the PLU DELETE
screen without deleting the PLU.
DELETE PLU
PLU NUMBER
ENTER=DELETE
ESC=ABORT
0

SAM4s ER-655II v1.2