Download
Share
Print this page
Sam4s ER-180U Operation And Programming Manual
  1. Manuals
  2. Brands
  3. Sam4s Manuals
  4. Cash Register
  5. ER-180U Series
  6. Operation and programming manual

Sam4s ER-180U Operation And Programming Manual

Electronic cash register au
Hide thumbs Also See for ER-180U:

Advertisement

Quick Links

Download this manual
ER-180U Electronic Cash Register AU
Operation and
Programming Manual
All specifications are subject to change without notice
JK68-80182A
From ER-180U v1.000 to v1.003

Advertisement

loading
Need help?

Need help?

Do you have a question about the ER-180U and is the answer not in the manual?

Questions and answers

Related Manuals for Sam4s ER-180U

Summary of Contents for Sam4s ER-180U

  • Page 1 ER-180U Electronic Cash Register AU Operation and Programming Manual All specifications are subject to change without notice JK68-80182A From ER-180U v1.000 to v1.003...
  • Page 2 ATTENTION The product that you have purchased contains a rechargeable Ni-MH battery. This battery is recyclable. At the end of its useful life, under various state and local laws, it may be illegal to dispose of the battery into the municipal waste system. Check with your local solid waste officials for details concerning recycling options or proper disposal WARNING This is a Class A product.
  • Page 3 Precaution Statements Follow these safety, servicing and ESD precautions to prevent damage and to protect against potential hazards such as electrical shock. Safety Precautions 1. Be sure that all built-in protective devices are 6. Observe the original lead dress, especially near the replaced.
  • Page 4 Servicing Precautions WARNING: First read the-Safety Precautions-section of this manual. If some unforeseen circumstance creates a conflict between the servicing and safety precautions, always follow the safety precautions. WARNING: An electrolytic capacitor installed with the wrong polarity might explode. 5. Check the insulation between the blades of the AC 1.
  • Page 5 Contents Getting Started About the ER-180U ........................1 Unpacking ..........................2 Installing the Paper ........................2 Basic Features and Functions ....................5 Standard Hardware ...................... 5 Optional Hardware ...................... 5 Software Features ......................5 Display ........................6 Error Messages List ..................... 7 Mode Key ........................
  • Page 6 Program Overlay Method ..................54 Descriptor Code Method ................... 55 Overlay Descriptor Programming Methods ................56 Tax Programming ........................58 Program 53 - Straight Percentage Tax Rate Programming ........58 Department Programming ......................59 ii  Contents ER-180U Electronic Cash Register AU...
  • Page 7 Postamble Logo Description Programming ............... 85 Program 1300 - Date and Time Programming............86 Program 1600 - Machine Number Programming ............86 Program Scans ......................... 87 Program 15 - Machine Number Programming ............87 Contents  iii ER-180U Electronic Cash Register AU...
  • Page 9  Along with 16 Departments, 500 PLUs (fixed) allows for easy item management.  ER-180U / ER-180UDL is an excellent low cost solution for a wide range of retail environments.  ER-180U / ER-180UDL, with its superb thermal printing system, always provide the fastest in transaction speeds.
  • Page 10 *An optional “paper takeup spindle + motor” kit is available if journal mode is required. Installing the Paper Remove the printer cover (A) and (B). 2. Open the housing clam cover and Insert the paper roll as shown (C) and (D) 2  Contents ER-180U Electronic Cash Register AU...
  • Page 11 4. Pass the paper through the receipt window of the printer cover. Replace over printer compartment (J) and (K). FOR JOURNAL ONLY Note: Paper take-up spool is optional. 5. Press FEED key to adventace paper (L). Getting Started  3 ER-180U Electronic Cash Register AU...
  • Page 12 6. Route paper over top of optional paper guide insert in the slot of the take-up spool (F) to (I) 7. Pass the paper through the receipt window of the printer cover. Replace over printer compartment (J) and (K). 4  Contents ER-180U Electronic Cash Register AU...
  • Page 13 48-position keyboard.  1 station thermal 24-column printer drop-and-print mechanism.  Cash Drawer  ER-180U: Modern design compact cash drawer with 4 Bill/4 Coin drawer.  ER-180UDL: Traditional large metal cash drawer with 4 Bill/8 Coin drawer.  7 Modes. ...
  • Page 14 Display The ER-180U comes with 8 digit florescent display on both front and rear. Both displays offer supplemental descriptors, which appear in the first two display positions (as shown). These descriptors help the operator and customer by supplying additional information while operating the register, and may be accompanied by an error tone.
  • Page 15 NO VOID PLU REQ.PRESET VALUE REQ.OPEN VALUE REQ. AMOUNT INVALID FUNCTION EJ FULL REQ.CASH DECLARATION REQ. Z REPORT INACTIVE REQ. MODE PASSWORD STOP PRINTING FOR COOLING OF PRINTER RECEIPT PRINTER PAPER END Getting Started  7 ER-180U Electronic Cash Register AU...
  • Page 16 •To select Register Mode using the fast track method enter 3 for REG and press the MODE MODE CALC NUMBER DISPLAY MODE VOID MODE (VOID) OFF MODE (OFF) REGISTER MODE (R) MANAGER MODE (X) Z MODE (Z) PROGRAM MODE (P) SERVICE MODE (S) 8  Contents ER-180U Electronic Cash Register AU...
  • Page 17 Keyboards ER-180U Standard Keyboard Layout The ER-180U keyboard is shown below with the default legends and key assignments. This configuration has 16 keyboard Department locations. RCPT X/TIME CLERK MODE FEED CLEAR ON/OFF SALE CALC C/CONV (÷) RETURN VOID CHECK CHARGE...
  • Page 18 NOTE: After moving to REG-Mode, if you see CLOSEd on display, please sign on a clerk to remove the CLOSEd condition and use the register. See Clerk Sign On/Sign Off section for detail. 10  Contents ER-180U Electronic Cash Register AU...
  • Page 19 Press to advance the printer paper. MODE Press MODE when outside of a sale to change mode position. CALC Press 100 and CALC when outside of a sale to use the ER-180U as a basic calculator. Operating Instructions  13 ER-180U Electronic Cash Register AU...
  • Page 20 Enter a quantity and then press the X/TIME key to enter multiple items. Use to enter “split X/TIME pricing” items, such as 1 item at 3 for $.89. Also use to perform the multiplication function in calculator mode. 14  Contents ER-180U Electronic Cash Register AU...
  • Page 21 To sign the clerk off, Enter 0 (Zero) and press the CLERK key. CLERK Receipt On and Off On ER-180U, the receipt printer can be switched ON/OFF in REG Mode. All reports in X(READ)/Z(RESET) Mode will still print even if the receipt printer has been turned off. To switch receipt printer ON/OFF,...
  • Page 22 1. Press the PO key. 2. Enter password (4 digits) and press the PO key to terminate. NOTE: To program Mode Password, Please see Program Mode Programming - Program 9999 for detail. 16  Contents ER-180U Electronic Cash Register AU...
  • Page 23 Calculator Function You can use the ER-180U to perform simple addition, subtraction and multiplication calculator functions outside of a sale. Move the mode key to REG-Mode and press CALC key. To exit from Calculator mode, press CLEAR key or select other modes.
  • Page 24 Item(s) Registrations All item(s) registration on ER-180U are made into preset and preset overridable Departments and PLUs.  Departments Registrations can be made by pressing the Department key on the keyboard.  PLU Registrations can be made by entering the PLU number then PLU function key.
  • Page 25 Department Entry - Preset Price Receipt Example: 1. Press a preset Department key. _______THANK-YOU For example, press DEPT 5: _______COME AGAIN 26/10/2015_MON 09:23 DEPT5 DEPT5_T1 $2.99 ROUND $0.01 $0.27 TOTAL $3.00 CASH $3.00 CLERK_1___000012__000000 Operating Instructions  19 ER-180U Electronic Cash Register AU...
  • Page 26 2. Enter an amount on the ten key pad. Do TOTAL $7.95 not use the decimal key. CASH $7.95 CLERK_1___000014__000000 For example, for $1.99, enter: 3. Press a Department key. For example, press DEPT1: DEPT1 20  Contents ER-180U Electronic Cash Register AU...
  • Page 27 (or enter a price and press a single _______COME AGAIN item open department key.) 26/10/2015_MON 09:23 For example, press DEPT 6: DEPT6_T1 $2.99 ROUND $0.01 DEPT6 $0.27 TOTAL $3.00 CASH $3.00 CLERK_1___000016__000000 Operating Instructions  21 ER-180U Electronic Cash Register AU...
  • Page 28 X/TIME 3. Enter an amount on the ten key pad. For example, if the items are priced 3 for $1.00, enter: 4. Press a Department key. For example, press DEPT 1: DEPT1 22  Contents ER-180U Electronic Cash Register AU...
  • Page 29 PLU Entry - Preset Price Receipt Example: 1. Enter the PLU number; press the PLU _______THANK-YOU key. _______COME AGAIN For example, enter: 26/10/2015_MON 09:23 PLU1_T1 $2.99 ROUND $0.01 $0.06 TOTAL $0.65 CASH $0.65 CLERK_1___000019__000000 Operating Instructions  23 ER-180U Electronic Cash Register AU...
  • Page 30 26/10/2015_MON 09:23 pad and press the X/TIME key: 2.99 PLU1_T1 $11.96 X/TIME ROUND -0.01 $1.09 2. Enter the PLU number; press the PLU TOTAL $11.95 key. CASH $11.95 CLERK_1___000020__000000 For example, enter: 24  Contents ER-180U Electronic Cash Register AU...
  • Page 31 For example, enter: DEPT1 $2.99 ROUND $0.01 TOTAL $2.00 2. Enter the item. In this example CASH $2.00 department #1 is normally CLERK_1___000021__000000 taxable: DEPT 1 3. The normal tax status is shifted. Operating Instructions  25 ER-180U Electronic Cash Register AU...
  • Page 32 DEPT1 T1 $10.00 -33.333% For example, for 1/3 off enter: AMOUNT T1 -3.33 ROUND -0.02 • $0.61 TOTAL $6.65 3. Press the -% key: CASH $6.65 CLERK_1___000023__000000 4. The discount is automatically subtracted. 26  Contents ER-180U Electronic Cash Register AU...
  • Page 33 2. Enter the amount you wish to subtract from the sale. DEPT1 T1 $10.00 -0.50 For example for a $.50 coupon, $0.91 enter: TOTAL $9.50 CASH $9.50 CLERK_1___000025__000000 Press the CLERK/ - (Minus) key. CLERK Operating Instructions  27 ER-180U Electronic Cash Register AU...
  • Page 34 PLU key where DEPT2 T1 -2.99 it was registered originally. ROUND -0.01 -0.27 TOTAL -3.00 DEPT 2 CASH -3.00 3. Total the sale with CASH, CHECK, or a CLERK_1___000026__000000 CHARGE function. 28  Contents ER-180U Electronic Cash Register AU...
  • Page 35 DEPT1 T1 -1.99 3. Enter the price of the first item, and then ROUND $0.01 press the DEPT2 key where it was $0.27 registered originally. TOTAL $3.00 CASH $3.00 CLERK_1___000028__000000 DEPT 1 Operating Instructions  29 ER-180U Electronic Cash Register AU...
  • Page 36 DEPT2 T1 -2.99 exemptions or any other function. ROUND -0.01 3. All totals and counters are corrected as if -0.27 TOTAL -3.00 the original transaction did not take CASH -3.00 place. CLERK_1___000030__000000 30  Contents ER-180U Electronic Cash Register AU...
  • Page 37 CASH $2.00 CLERK_1___000032__000000 4. Press CHARGE: CHARGE 5. The display will indicate “=” for total, the drawer will open and the receipt will print as in the example on the right. Operating Instructions  31 ER-180U Electronic Cash Register AU...
  • Page 38 CHECK. CHECK 4. Enter the charge amount received, press CHARGE CHARGE 5. You can continue to itemize receipts, or you can finalize by pressing or selecting the same received on account key. 32  Contents ER-180U Electronic Cash Register AU...
  • Page 39 CHECK 4. Enter the charge amount received, press CHARGE CHARGE 5. You can continue to itemize paid outs, or you can finalize by pressing or selecting the same paid out key. Operating Instructions  33 ER-180U Electronic Cash Register AU...
  • Page 40 See "Print Option Programming" in the "Program Mode Programming" chapter. 1. Register the items you wish to sell. 2. Press SUBTOTAL. The subtotal will display with the message "Sub" indicated on the rear display. TOTAL 34  Contents ER-180U Electronic Cash Register AU...
  • Page 41 CHECK DEPT1 T1 $2.99 3. The display will indicate the total amount 1.99 DEPT2 T1 $7.96 of the check sale. DEPT3 T1 $3.99 ROUND $0.01 $1.36 TOTAL $14.95 CHECK $14.95 CLERK_1___000036__000000 Operating Instructions  35 ER-180U Electronic Cash Register AU...
  • Page 42 3. Press CHECK: ROUND $0.01 $1.36 CHECK TOTAL $14.95 CHECK $20.00 4. The display will indicate the total amount CHANGE $5.05 CLERK_1___000038__000000 of the check tendered and the change due, if any. 36  Contents ER-180U Electronic Cash Register AU...
  • Page 43 26/10/2015_MON 09:23 the keyboard: DEPT1 T1 $2.99 1.99 CHARGE DEPT2 T1 $7.96 DEPT3 T1 $3.99 ROUND $0.01 $1.36 TOTAL $14.95 CHARGE ______$20.00 CHANGE $5.05 CLERK_1___000040__000000 Operating Instructions  37 ER-180U Electronic Cash Register AU...
  • Page 44 4. Enter the amount of the new tender, ROUND $0.01 Press CASH: $1.36 TOTAL $14.95 CASH/ CASH $14.95 TEND CLERK_1___000042__000000 5. The display will indicate the change due. Change $5.05 in this example. 38  Contents ER-180U Electronic Cash Register AU...
  • Page 45 The currency symbol you $5.29 change due. The change due is program will display here. See computed in home currency! "Print Option Programming" in “Program Mode Programming” chapter. Operating Instructions  39 ER-180U Electronic Cash Register AU...
  • Page 47 All Management Functions take place with the X mode (READ mode). Some register operations may be programmed to require in the X mode (READ mode) in order to operate. Management Reports X/Z Mode  41 ER-180U Electronic Cash Register AU...
  • Page 48 X – READ 3 - SUBTOTAL All Clerk Z – RESET 3 - SUBTOTAL X – READ Print All EJ 300 - SUBTOTAL 399 - SUBTOTAL Reset EJ Z – RESET (will not print) 42  Contents ER-180U Electronic Cash Register AU...
  • Page 49 DRAWER TTL $118.76 CASH DIFFERENCE $0.00 4. Enter the total of checks and press the CLERK_1___000044__000000 CHECK key. CHECK 5. Press the CASH key to total the declaration. CASH/ TEND Management Reports X/Z Mode  43 ER-180U Electronic Cash Register AU...
  • Page 50 Total of Return Merchandise -> RETURN Count of Last Item Voids (Error Corrections) -> $0.00 Total of Last Item Voids (Error Corrections) -> ERROR CORR $0.00 Continued on the next page ... 44  Contents ER-180U Electronic Cash Register AU...
  • Page 51 PLU Sales Activity Counter & Total -> CNT 1 $4.95 DEPT25 CNT 5 $8.85 ************************ Count & Total of all PLUs -> TOTAL CNT TOTAL AMT $13.80 CLERK 2 000045 000000 Management Reports X/Z Mode  45 ER-180U Electronic Cash Register AU...
  • Page 52 NET SALE $10.50 GROSS SALES $10.50 DRWR TTL $10.50 ************************ CLERK 5 ************************ CLERK 6 ************************ CLERK 7 ************************ CLERK 8 ************************ CLERK 9 ************************ CLERK 10 ************************ CLERK 2 000046 000000 46  Contents ER-180U Electronic Cash Register AU...
  • Page 53 Gross Total NET TTL RETURN MDSE VOID MODE -% (Sale Discount Total) - (Sale Minus Key Total) GROSS SALES TTL Grand Total Yesterdays Grand Total Gross Sales Total GRAND TOTAL Management Reports X/Z Mode  47 ER-180U Electronic Cash Register AU...
  • Page 55 Memory All clear (Clear All Memory back to factory default)  Program 20 - Clear All Sales Totals  Program 30 - Clear Grand Total  Program 50 - EPROM Information Service Mode Programming  49 ER-180U Electronic Cash Register AU...
  • Page 56 Memory All Clear Before you use your Sam4S Electronic Cash Register for the first time, you must perform a memory all clear to insure that all totals and counters are cleared and that the default program is installed. CAUTION: The procedures described in this area are security sensitive. Clearing all or parts of the memory may cause damage or loss to the program.
  • Page 57 2. To Reset Grand Total, enter 30, and then press the SUBTOTAL key. TOTAL EPROM Information Program 50 - EPROM Information 1. Move to the S-Mode. 2. To Scan EPROM Information, enter 50, and then press the SUBTOTAL key. TOTAL  51 ER-180U Electronic Cash Register AU...
  • Page 59 All programming (unless otherwise noted) is done with the control lock in the P position. Each section details a specific area of register programming.  The Default program is set to 10.000% VAT on Tax 1 and the description is set to GST already. Program Mode Programming  53 ER-180U Electronic Cash Register AU...
  • Page 60 There are two methods available to program descriptors, the Program Overlay Method and the Descriptor Code Method. Program Overlay Method Alpha Keyboard Layout (EPROM v1.003 and later) DOUBLE CAPS BACK SUB TOTAL • SPACE CASH / TEND 54  Contents ER-180U Electronic Cash Register AU...
  • Page 61 CODE € CHAR SPACE " & CODE CHAR CODE CHAR < CODE CHAR > CODE CHAR CODE CHAR CODE CHAR CODE CHAR CODE CHAR CODE CHAR BACK SPACE Double CODE Program Mode Programming  55 ER-180U Electronic Cash Register AU...
  • Page 62 PO (Paid Out) 0044 8 CHAR CHECK 0045 8 CHAR CHARGE 0046 8 CHAR SUBTOTAL 0047 8 CHAR CASH 0048 8 CHAR HOME CURRENCY 0001 5 CHAR FOREIGN CURRENCY 0001 5 CHAR 56  Contents ER-180U Electronic Cash Register AU...
  • Page 63 Descriptor Programming Examples (EPROM v1.003 and later) Example Key Sequence aBG9 VOID VOID abg9 VOID RETURN Program Mode Programming  57 ER-180U Electronic Cash Register AU...
  • Page 64 Tax Programming The Sam4S ER-180U Electronic Cash Registers has the capability to support four separate taxes. Taxes can be calculated as either a straight percentage rate of between 0.001% and 99.999%, or a 60 break point tax table. Each tax may be either an add-on tax (added to the cost of a taxable item), or a value added tax (VAT) that is included in the price of the item.
  • Page 65 Department is preset, or the high amount lock out (HALO) if the Department is open price.  Department Descriptor Programming allows you to set a unique, up to 12-character descriptor for each Department. Program Mode Programming  59 ER-180U Electronic Cash Register AU...
  • Page 66 Yes = 1 Department is taxable by rate 1? No = 0 Yes = 1 Department is override preset? No = 0 Yes = 1 Department is preset? No = 0 AU default 00000111 60  Contents ER-180U Electronic Cash Register AU...
  • Page 67 (The maximum preset price you can enter is $50,000.00.) X/TIME Price/HALO 5. To program additional Departments, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  61 ER-180U Electronic Cash Register AU...
  • Page 68 4. Enter 12 three character codes, then press X/TIME key. Please refer to the descriptor code chart. Enter up to 12 X/TIME three-digit character codes 5. To program additional Department, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND 62  Contents ER-180U Electronic Cash Register AU...
  • Page 69 PLU Descriptor Programming allows you to set a unique, up to 12-character descriptor for each PLU.  Program 350 - PLU Link Programming allows you to link a PLU to a DEPT for reporting. Program Mode Programming  63 ER-180U Electronic Cash Register AU...
  • Page 70 Yes = 1 PLU is taxable by rate 1? No = 0 Yes = 1 PLU is override preset? No = 0 Yes = 1 PLU is preset? No = 0 AU default 00000111 64  Contents ER-180U Electronic Cash Register AU...
  • Page 71 4. If the PLU is open, enter a HALO of up to 7 digits. If the PLU is preset, enter a preset price. X/TIME Price/HALO 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  65 ER-180U Electronic Cash Register AU...
  • Page 72 4. Enter 12 three character codes, then press X/TIME key. Please refer to the descriptor code chart. Enter up to 12 X/TIME three-digit character codes 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND 66  Contents ER-180U Electronic Cash Register AU...
  • Page 73 4. Press a DEPARTMENT key on the keyboard you wish the PLU linked to DEPT 5. To program additional PLUs, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  67 ER-180U Electronic Cash Register AU...
  • Page 74 5. Repeat from step 3 for each system option you wish to change. 6. Press the CASH key to end system option programming. System Option Flowchart Repeat for each System Option SBTL X/TIME SBTL CASH Status Option # 68  Contents ER-180U Electronic Cash Register AU...
  • Page 75 Reset the PLU report Z counter after a Z1 PLU report? No = 0 Yes = 1 Reset the Clerk report Z counter after a Z1 Clerk report? No = 0 Yes = 1 Triple multiplication No = 0 Program Mode Programming  69 ER-180U Electronic Cash Register AU...
  • Page 76 .05 - .09 = .10 Training Clerk (0 ~ 10; 0 is No Training Clerk) Reserved Yes = 1 Use Thousand separator No = 0 Yes = 1 Use Mode Password No = 0 70  Contents ER-180U Electronic Cash Register AU...
  • Page 77 5. Repeat from step 3 for each print option you wish to change. 6. Press the CASH key to end print option programming. Print Option Flowchart Repeat for each System Option SBTL X/TIME SBTL CASH Option # Status Program Mode Programming  71 ER-180U Electronic Cash Register AU...
  • Page 78 Yes = 1 Print preamble message on receipt? No = 0 Yes = 1 Print postamble message on receipt? No = 0 Yes = 1 Print Z-Report on Electronic Journal No = 0 72  Contents ER-180U Electronic Cash Register AU...
  • Page 79 No = 0 Yes = 1 Print the PLU/DEPT number on the receipt? No = 0 Yes = 1 Print the PLU number on PLU report? No = 0 Program Mode Programming  73 ER-180U Electronic Cash Register AU...
  • Page 80 Program 90 - is used to set a high amount limit (HALO) & rates In this chapter you will find:  General instructions for programs 70, 80 and 90.  Specific programming instructions for each function key. 74  Contents ER-180U Electronic Cash Register AU...
  • Page 81 N6 and you are only selecting a value for N6, just enter the value for N6.) Press the function key you wish to program. FUNCTION 4. To program additional function keys, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  75 ER-180U Electronic Cash Register AU...
  • Page 82 3. Enter up to 8 three-character codes and press the FUNCTION KEY. Enter up to 8 FUNCTION three-digit character codes 4. To program additional function keys, repeat from step 3, or press the CASH key to finalize the program. CASH/ TEND 76  Contents ER-180U Electronic Cash Register AU...
  • Page 83 4. Press the function key on the keyboard you wish to program. FUNCTION 5. To program additional function keys, repeat from step 2, or press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  77 ER-180U Electronic Cash Register AU...
  • Page 84 Yes = 1 Exempt tax 4? No = 0 Descriptor - Refer to “Program 80 - Function Key Descriptor (Code Method)” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” 78  Contents ER-180U Electronic Cash Register AU...
  • Page 85 Key is inactive? No = 0 Descriptor - Refer to “Program 80 - Function Key Descriptor (Code Method)” HALO - Program 90 - Refer to “Program 90 - Function Key HALO” Program Mode Programming  79 ER-180U Electronic Cash Register AU...
  • Page 86 The US dollar (home currency) is worth 1.3720 Canadian dollars (foreign currency). Exchange Rate Decimal Position The US dollar (home currency) is worth 110.24 Japanese Yen (foreign currency). Exchange Rate Decimal Position 80  Contents ER-180U Electronic Cash Register AU...
  • Page 87 Note: If key is amount, enter 5 digit HALO, or 0 for no HALO. If key is percentage enter the percentage in a five-digit format, without the decimal (XX.XXX). For example: for 10%, enter 10000; for 5.55%, enter 05550; for 99.999%, enter 99999. Program Mode Programming  81 ER-180U Electronic Cash Register AU...
  • Page 88 3. Enter a secret code (up to 4 digits); press the X/TIME key. Enter the secret code, X/TIME up to 4 digits 4. Press the CASH key to finalize the program. CASH/ TEND 82  Contents ER-180U Electronic Cash Register AU...
  • Page 89 4. Enter up to 8 three-character codes and press SUBTOTAL key. Enter up to 8 TOTAL three-digit character codes 5. Press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  83 ER-180U Electronic Cash Register AU...
  • Page 90 X/TIME key. X/TIME 4. Enter up to 24 three-character codes and press SUBTOTAL key. Enter up to 24 TOTAL three-digit character codes 5. Press the CASH key to finalize the program. CASH/ TEND 84  Contents ER-180U Electronic Cash Register AU...
  • Page 91 4. Enter up to 24 three-character codes and press SUBTOTAL key. Enter up to 24 TOTAL three-digit character codes 5. Press the CASH key to finalize the program. CASH/ TEND Program Mode Programming  85 ER-180U Electronic Cash Register AU...
  • Page 92 Program 1300 - Date and Time Programming Use this program to set the clock and calendar on your ER-180U. The date changes automatically. After initial setting, time changing will probably be required only for beginning and ending daylight savings time.
  • Page 93 Program Scans Since much time and energy has been invested in the planning and programming of your ER-180U, it is advisable to print a hard copy of the final program for future reference. This copy should be kept in a safe place.
  • Page 94 X/TIME key. To see additional scan, repeat this operation. X/TIME Program System option Print option Function keys Clerk Preamble message/ Postamble message 4. Press the CASH key to finalize the program. CASH/ TEND Version Goodson 1.0 88  Contents ER-180U Electronic Cash Register AU...
  • Page 95 JK68-80182A...

This manual is also suitable for:

Er-180udl