Table of Contents
Advertisement
Postamble
The postamble is a programming message of up to six lines of 32 characters that appears at
the bottom of each receipt and/or guest check.
SAM4s ER-655II v1.2
1. From the LOGO DESC. PROGRAM screen, press 0 to display the
POSTAMBLE screen:
LINE 1 :
LINE 2 :
LINE 3 :
2. Using the alpha numeric keyboard overlay, type the first line of the message.
Each line can be up to 32 characters, although only the last 19 characters you
have entered will display. If you make a mistake, press the BACKSPACE key
to erase the previous character. After you have completed typing the first line,
press ENTER to accept the new line and advance to the second line, or press
ESC to return to the LOGO DESC. PROGRAM screen without making any
changes.
3. Using the same procedure, continue programming each line as necessary. Press
ESC at any time to exit. After programming the third line, the fourth, fifth and
sixth lines display:
LINE 4 :
LINE 5 :
LINE 6 :
4. When the last line has been entered, press ENTER to accept the line and return
to the LOGO DESC. PROGRAM screen.
POSTAMBLE
POSTAMBLE
Program Mode Programming 205
Advertisement
Table of Contents
