Table of Contents
Advertisement
Field
TYPE
IRC
SAM4s ER-655II v1.2
3. When a report is selected, the Z REPORT OPTIONS screen displays:
Z REPORT OPTIONS
RPT#: 1 FINANCIAL
1. TYPE
0:DAILY 1:PERIOD
2. 0:PRINT
3. IRC
0:STANDALONE
1:ALL 2:SELECT
4. Select the TYPE (DAILY or PERIOD and the IRC configuration. Refer to the
explanations in the table below. Press ENTER after each selection. After the
last selection, the report will start.
5. If IRC is SELECT, then the register selection displays:
Z REPORT OPTIONS
RPT#: 1 FINANCIAL
1. TYPE :
0:DAILY 1:PERIOD
2. 0:PRINT
3. IRC
# 1 2 3 4 5 6 7 8
6. Press the YES/NO key at each register # to select whether you wish to include
each register in the consolidated report. Press ENTER after each selection.
After the last selection, the report will start.
Y
Y N N N N N N
Description
Select Z1 or Z2 if available for the selected report.
Select STANDALONE, ALL, or SELECT if available for
the selected report. If SELECT, the screen prompts for
selection of registers - the screen will initially show the
registers available from the from/to IRC register
programming, for example if the IRC range is from 1 to 3,
then the selection will default to:
1
2
3
4
5
Y
Y
Y
N
N
0
0
0
0
0
2
6
7 8
N
N N
Z Mode 93
Advertisement
Table of Contents
