Table of Contents
Advertisement
Notes:
1. Numeric keys (0-9), CLEAR/ESC, and CASH/ENTER cannot be removed from the
keyboard unless they have been assigned to a new keyboard location. This protects the
programmer from accidentally removing keys that are required for register programming
and operations.
2. If you wish to program the CASH/ENTER key, select it immediately after selecting KEY
ASSIGNMENT from the SERVICE MODE menu. After the initial key is programmed,
the CASH/ENTER key is used to finalize the program.
108 Service Mode Programming
4. With the key code list displayed, you can press PAGE DOWN repeatedly, or
PAGE UP until you find the key code you wish to use. Type the key code
number you wish to place and pess ENTER. The KEY ASSIGNMENT screen
displays again:
KEY ASSIGNMENT
PUSH KEY TO BE
PROGRAMMED
PRESS ENTER TO EXIT
5. Continue to program function key locations as necessary. When you have
completed function key programming, press the ENTER key to finalize. The
screen displays:
KEY ASSIGNMENT
PRESS ENTER TO
SAVE CHANGES
PRESS ESCAPE TO EXIT
WITHOUT SAVING
6. Press ENTER to save the changes you have made, or press ESC to exit without
saving changes.
7. The printer will print out a receipt showing all the changes made to the keyboard.
0
OR
SAM4s ER-655II v1.2
Advertisement
Table of Contents
