Restarting The Antenna; Operations Mode - KVH Industries TracVision G8 Owner's Manual

Main Menu
Pressing the center key will cycle the main menu through the
available functions as follows:
Select Installed Satellite A
Proceed to Section 3.3,
"Installing Satellites"
Proceed to Section 3.4,

"Restarting the Antenna"

Proceed to Section 3.5,

"Operations Mode"

The RETURN and CANCEL Keys
Throughout the menus, the right-hand key will often be
designated as either RETURN or CANCEL. These options have
the following functions:
• RETURN – Returns to the main menu or display.
If no keys are pressed within 10 seconds, the menu
will automatically default to the main display.
CANCEL
• – Cancels the current action and returns
to the start of the action without making any
changes.
54-0198
Tracking <SAT NAME>
SAT A Menu SAT B
Install Satellite?
Yes Next Return
Restart Antenna?
Yes Next Return
Operations Mode?
Yes Next Return
Return to "Install
Satellite"
Figure 3-3
Main Menu Functions
Select Installed Satellite B
Return to Main Display
Return to Main Display
Return to Main Display
Using the MCU Interface
61