KVH Industries TracVision G8 Owner's Manual page 114

TracVision G8 Owner's Manual - Guide to Technical Information
116
11. Reconnect the motor cable that you removed in
Step 5.
12. Apply a small amount of Loctite threadlocker to
the threads of the four #8-32 screws that you
removed in Step 4.
13. Carefully reattach the LNB/feed tube assembly to
the antenna reflector and secure in place with the
four #8-32 screws.
14. Reconnect the cables that you removed in Steps 2
and 3.
15. Using a 7 ⁄ " wrench, carefully reattach the RF
1 6
cables to the LNB.
54-0198