Using The Mcu Interface - KVH Industries TracVision G8 Owner's Manual

3 - Using the MCU
Interface
This section explains how to use all of the MCU functions. You will use
the MCU to operate, control, and monitor the TracVision G8.
Contents
3.1 Startup and Self-test . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .59
3.2 Main Display and Accessing the Main Menu . . . . . . . . . . . . . . . .60
3.3 Installing Satellites . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .63
3.4 Restarting the Antenna . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
3.5 Operations Mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .65
54-0198

Using the MCU Interface

57