Replacing The Lnb - KVH Industries TracVision G8 Owner's Manual

TracVision G8 Owner's Manual - Guide to Technical Information
Figure 5-43
North American-style LNB
120

5.17 Replacing the LNB

1. Using a 7 ⁄ " wrench, carefully disconnect the RF
1 6
cables from the LNB. (Figure 5-43 shows a North
American-style LNB;
shows a European-style LNB).
RF Cable
Connector
#8-32 Set Screws
2. Using a ⁄ " allen key, loosen the two #8-32 set
5
6 4
screws securing the LNB in place. Remove the old
LNB.
3. Install the new LNB and secure in place with the
#8-32 set screws.
4. Using a 7 ⁄ " wrench, carefully reattach the RF
1 6
cables that you removed in Step 1.
Figure 5-38 on page 117
(x 2)
LNB
54-0198