Startup And Self-Test - KVH Industries TracVision G8 Owner's Manual

3.1

Startup and Self-test

To turn on the TracVision G8, follow the steps below.
1. Turn on the IRD and television.
2. Apply operating power to the MCU.
3. Wait while the system initializes and searches for
the satellite.
The MCU displays the following screens during system startup:
KVH Industries, Inc.
TracVision G8
Antenna initializing
SAT A Menu SAT B
Init RF Board
SAT A Menu SAT B
Init Antenna
SAT A Menu SAT B
Limit Switch Test
SAT A Menu SAT B
Init Sensor
SAT A Menu SAT B
Init Rate Bias
SAT A Menu SAT B
54-0198
** Search mode 1 **
SAT A Menu
** Search mode 2 **
SAT A Menu
** Search mode 3 **
SAT A Menu
Entering Tracking
SAT A Menu
Network ID Check
SAT A Menu
Tracking <SAT NAME>
SAT A Menu
To Main Display
Figure 3-1
TracVision G8 Startup Screens
SAT B
SAT B
"Search Mode" screens may not
appear during every startup.
SAT B
SAT B
SAT B
SAT B
Using the MCU Interface
59