Using The Mcu Interface - KVH Industries TracVision G8 Owner's Manual

TracVision G8 Owner's Manual - Guide to Operation
MCU Front Panel
Commonly Used Menu Functions
10
7

Using the MCU Interface

All TracVision G8 operations are controlled and monitored using
the MCU. An LCD display shows configuration data and three
soft keys enable you to perform basic menu-driven tasks.
Figure 5
LCD Display
Soft Keys
During the TracVision G8 installation process, the satellite
selections should have been configured to your specifications as
detailed in the Guide to Technical Information. Once the system is
installed and functioning properly, the system will function
automatically.
However, there may be instances in which you need to access
certain settings via the MCU interface. To assist you, KVH has
provided the following information resources:
Quick Reference Guide:
The
of this manual illustrates the main display and the
overall menu structure, allowing you to easily and
quickly navigate among the MCU menus.
Section 3 in the Guide to Technical Information:
Section 3, "Using the MCU Interface," on page 57
the Guide to Technical Information provides a
detailed explanation of every menu option and
system configuration setting. These menus should,
for the most part, be accessed by authorized
technicians. The following are the most commonly
used menu functions:
Table 1
Menu Function
Install Satellite
Set Sleep On/Off
Set Brightness
quick reference guide on the inside front cover
Purpose
Install a satellite to track
Turn Sleep Mode on or off
Adjust the MCU display's brightness
of
See Page:
63
70
80
54-0198