Restarting The Antenna - KVH Industries TracVision G6 Installation & Technical Manual

Restarting the Antenna

After resetting satellite parameters, it is necessary to restart the
antenna before the new settings take effect.
Restart antenna?
Yes Next Return
Antenna Restarted
Turning Sleep Mode On/Off
Sleep Mode turns off conical scan tracking if the antenna holds
the same position for 1 minute. As soon as the vessel moves, the
system will automatically begin tracking the satellite again.
Set sleep On/Off?
Yes Next Return
sLEEP mode: ON
On ENTER
Turning Instant On Mode On/Off
Instant On allows the antenna to immediately receive a TV signal
if the vessel has not moved since the antenna was last shut off. If
the vessel moves after acquiring the satellite via Instant On, the
antenna will undergo its standard initialization process, resulting
in a brief interruption of the TV signal.
Set instant On/Off?
Yes Next Return
iNSTANT mode: ON
On ENTER Off
54-0161
Proceed to "Turning Sleep Mode
On/Off"
This screen is displayed for 3 seconds
before returning to startup sequence
and main data display
Proceed to "Turning Instant On
Mode On/Off"
Off
The antenna communication setting will
blink "ON" or "OFF" based on current
selection. ON activates Sleep Mode.
Pushing the ON and OFF buttons will
change the selected setting.
Proceed to "Installing a New
Satellite Pair"
The antenna communication setting will
blink "ON" or "OFF" based on current
selection. ON activates Instant On Mode.
Pushing the ON and OFF buttons will
change the selected setting.
Using the ADCU Interface
Figure 3-29
Restart Antenna Menu
Figure 3-30
Sleep Mode Menu
As its factory default setting, Sleep
Mode is turned ON.
Figure 3-31
Instant On Mode Menu
As its factory default setting, Instant
On Mode is turned ON.
83