Installing a New Satellite Pair
TracVision G8 permits two satellite services (Satellites A and B) to
be installed simultaneously. There is also an option for NONE on
Satellite B, permitting single satellite operation.
Install Satellite?
Enter
Next
Install A <SAT NAME>
Yes
Next
Install B <SAT NAME>
Yes
Next
Installing sats
Please wait
<SAT Name> and
<SAT NAME> installed
Restart antenna?
Yes
Restart
Antenna
System
54-0198
Return
Proceed to "Setting Latitude
and Longitude
Cancel
Selecting NEXT will cycle
the display through all
available satellites.
Cancel
Selecting NEXT will cycle
the display through all
satellites that can be paired
with the selection for
Satellite A. If no satellite is
available for a pair or you
wish a single satellite
configuration, select NONE.
Refer to Tables 3-1 and
3-2 for available North
American and European
satellite pairs.
No
Using the MCU Interface
Figure 3-16
Install Satellite Pair Process
71