Table of Contents
Advertisement
9500PPC Mobile Computer
Scan Angle
SYMBOLOGY SETTINGS TABLE
LR/ELR/2D
Codabar
CLSI Editing
NOTIS Editing
Select Length
Code 128
Code 128
UCC/EAN-128
ISBT 128
Industrial 25 (= Discrete 25)
Select Length
Interleaved 25
Convert to EAN-13
Verify Checksum
84
Reference Manual
Select the scan angle for the Long Range Laser scan engine.
"narrow" 30°
"wide" for 42°
DESCRIPTION
When applied, the CLSI editing strips the start/stop
characters and inserts a space after the first, fifth, and tenth
characters of a 14-character Codabar barcode.
The 14-character barcode length does not include
start/stop characters.
Decide whether to include the start/stop characters in the
data being transmitted.
NOTIS Editing is to strip the start/stop characters, i.e.
to disable "Transmit Start/Stop Characters".
One or two fixed lengths
Range (1~55)
Read standard Code 128 barcodes (=without leading FNC1
character).
Read UCC/EAN-128 barcodes with leading FNC1
character.
Read ISBT 128 barcodes.
One or two fixed lengths
Range (1~55)
Convert a 14-character barcode into EAN-13 if the
following requirements are met:
The barcode must have a leading 0 and a valid EAN-13
check digit.
Decide whether to verify the checksum. If desired, select
one of the algorithms below. If the checksum is incorrect,
the barcode will not be accepted.
No
USS algorithm
OPCC algorithm
Narrow
DEFAULT
Disable
No
No
4~55
---
Enable
Enable
Enable
Enable
4~55
Enable
No
No
Advertisement
Table of Contents
