Table of Contents
Advertisement
Bluetooth
Manager
Wi-Fi Utility
Reader Cfg
Connected to
USB
Note: If no Wi-Fi button, go to Start > Programs and run the program Swluce. If no barcode
button, go to Start > Programs and run the program ReaderCfg.
2.1.4 INPUT METHODS
Data entry can be performed by the following methods:
Type with the physical keypad.
Scan barcode or RFID tag in applications, e.g. Pocket Word, Pocket Excel, CipherLab's
Application Generator, etc.
Tap or write using SIP (Soft Input Panel)
Draw in some applications, e.g. Note and Pocket Word
USING THE SOFT INPUT PANEL (SIP)
Tap the SIP button on the Command Bar to select a SIP mode or hide the input panel. To select a
SIP mode, tap the arrow next to the SIP button.
In each mode, the characters appear as typed text on the screen.
Bluetooth Power is turned off.
Bluetooth Power is turned on. Tap to run Bluetooth Manager.
WLAN Power is turned off (driver not loaded).
WLAN Power is turned on. Tap to run Wi-Fi Utility.
WLAN connected.
Tap to configure the barcode or RFID reader.
Options include BC Reader and RFID Reader (if installed).
The mobile computer is connected to a computer via its USB
cradle. Tap to configure USB connection.
Chapter 2
Learning Pocket PC Basics
25
Advertisement
Table of Contents
