Audio; Vibrator; Data Capture; Communications - CipherLab 9500PPC Reference Manual

Table of Contents

9500PPC Mobile Computer

1.5.2 AUDIO

The mobile computer is integrated with a mono speaker, a low power transducer type, used for

playing sounds applied to events in Windows and programs, as well as playing audio files such as

.WAV, .MP3 files. In addition, it can be programmed for status feedback.

PRESS

FIRST, AND THEN

The volume of the speaker can be turned on and adjusted increasingly by the key combination:

[Func] + [6]. Keep pressing the key combination ([Func] first, and then [6]) until the volume is

increased to a desired level.

PRESS

FIRST, AND THEN

The volume of the speaker can be turned on and adjusted decreasingly by the key combination:

[Func] + [7]. Keep pressing the key combination ([Func] first, and then [7]) until the volume is

decreased to a desired level.

The mobile computer is integrated with a vibrator, which is software programmable for feedback.

This can be helpful when working in noisy environments.

A wide variety of scan engines is available for delivering flexibility to meet different requirements.

Depending on the scan engine integrated (check the "Active Device" setting in ReaderConfig), the

mobile computer is capable of scanning barcodes of a number of symbologies that are enabled by

default. If you need to scan barcodes that are encoded in a different symbology, use the Reader

Configuration Utility to enable the symbology first.

Refer to Appendixes for details on scan engine settings.

Note: The mobile computer allows the co-existence of one integrated scan engine and the RFID

reader.

The cradle is designed for charging and communications at the same time.

1) Place the cradle on a flat and clean surface.

Reference Manual

Table of Contents