CipherLab 9500PPC Reference Manual page 90

9500PPC Mobile Computer
Code 93
MSI
Verify Checksum
Transmit Checksum
Select Length
Negative Barcode
Plessey
Convert to UK Plessey When applied, each occurrence of the character "A" in the
Transmit Checksum
Telepen
Original Telepen
(Numeric)
AIM Telepen (Full
ASCII)
RSS-14
Transmit Code ID
Transmit Application
ID
Transmit Checksum
RSS Limited
Transmit Code ID
Transmit Application
ID
Transmit Checksum
80
Reference Manual
Select one of the three calculation formulas to verify the
checksum. If the checksum is incorrect, the barcode will not
be accepted.
Single Modulo 10
Double Modulo 10
Modulo 11 & 10
Decide whether to include the checksum in the data being
transmitted.
Last digit not transmitted
Both digits transmitted
Both digits not transmitted
One or two fixed lengths
Range
barcode data will be replaced by the character "X".
Decide whether to include the checksum (2 digits) in the
data being transmitted.
The original Telepen includes numeric characters.
AIM Telepen (Full ASCII) includes all the alphanumeric and
special characters.
Decide whether to include Code ID ("]e0") will be included
in the data being transmitted.
Decide whether to include the Application ID ("01") in the
data being transmitted.
Decide whether to include the checksum in the data being
transmitted.
Refer to RSS-14.
Refer to RSS-14.
Refer to RSS-14.
Enable
Disable
Single
Modulo 10
Both digits
transmitted
0~127
Disable
Disable
No
Yes
Disable
Yes
No
Disable
Yes
Yes
Yes
Disable
Yes
Yes
Yes