Re-Calibrating The Screen; Notifications; Status Led - CipherLab 9500PPC Reference Manual

PRESS FIRST, AND THEN
The LED backlight of the screen can be turned on and adjusted increasingly by the key combination:
[Func] + [.]. Keep pressing the key combination ([Func] first, and then [.]) until the luminosity is
increased to a desired level.
START > SETTINGS > SYSTEM TAB AND TAP THE BACKLIGHT ICON
The backlight can be toggled on and off automatically, either on battery or AC power. To conserve
more power, you may go to Start > Settings > System tab > Power to configure the auto
turn-off setting.
START > SETTINGS > SYSTEM TAB AND TAP THE BACKLIGHT CONTROL ICON
Tap, hold, and drag the slider to manually adjust the luminosity of backlight. Alternatively, you may
select to auto adjust backlight by the battery's capacity.

1.4.2 RE-CALIBRATING THE SCREEN

This LCD is also a touch screen that can be calibrated through screen alignment.
START > SETTINGS > SYSTEM TAB AND TAP THE SCREEN ICON
In the Alignment tab, tap [Align Screen] to start with screen alignment if necessary.
In the Clear Type tab, you may select Clear Type for fonts.
In the Text Size tab, you may tap, hold, and drag the slider to configure text size.
Warning: Do not use any pointed or sharp objects to move against the surface of the screen.

1.5 NOTIFICATIONS

1.5.1 STATUS LED

The dual-color LED on top is used to provide information on the charging status or wireless status.
TASKS
Low battery charge
Charging 9500PPC
Charging done
Charging error
Wireless signal searching
Chapter 1
GREEN LED
---
---
On
---
Flashing
Using the 9500PPC Mobile Computer
RED LED
Flashing
On
---
---
---
GREEN & RED
---
---
---
Flashing
---
17