CipherLab 9500PPC Reference Manual page 95

Transmit Checksum
Select Length
Code 39
Convert to Code 32
Code 32 Prefix
Verify Checksum
Transmit Checksum
Code 39 Full ASCII
Select Length
Trioptic Code 39
Code 93
Select Length
MSI
Verify Checksum
Transmit Checksum
Select Length
Decide whether to include the checksum in the data being
transmitted.
"Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
One or two fixed lengths
Range (1~55)
Convert to Italian Pharmacode.
Prefix character "A" to Code 32 barcodes.
Decide whether to verify the checksum. If the checksum is
incorrect, the barcode will not be accepted.
Decide whether to include the checksum in the data being
transmitted.
"Verify Checksum" must be enabled so that the
checksum can be left out (= "Transmit Checksum"
disabled).
Code 39 Full ASCII includes all the alphanumeric and special
characters.
One or two fixed lengths
Range (1~55)
One or two fixed lengths
Range (1~55)
If Two Check Digits option is selected, an additional
verification is required to ensure integrity. Select one of the
algorithms below. If the checksum is incorrect, the barcode
will not be accepted.
CHECK DIGIT
One Check Digit
Two Check Digits
Decide whether to include the checksum in the data being
transmitted.
One or two fixed lengths
Range (1~55)
Appendix III LR/ELR Laser Scan Engine
ALGORITHM
Single Modulo 10
Mod 10/Mod 11
Mod 10/Mod 10
No
4~55
Enable
No
No
No
No
Disable
4~55
Disable
Enable
4~55
Enable
Single
Modulo 10
No
4~55
85