Bluetooth Activesync - CipherLab 9500PPC Reference Manual

Table of Contents

9500PPC Mobile Computer

7) You may proceed to run the application program, e.g. ActiveSync that wishes to use the

Bluetooth Serial Port service. If you want to use ActiveSync via Bluetooth, you must not register

a COM port in step 4.

Note: In case timeout occurs during pairing, try again.

REGISTERED BLUETOOTH SERIAL PORT

At the last stage of establishing a Bluetooth connection, a dialog box prompts to ask whether you

want to register a COM port for the Bluetooth Serial Port service. If you tap [No] to close that

dialog box, you may still register a serial port in this tab.

COM8 is registered as Server Port by default. The connection will be initiated by a remote

device.

Tap [Register New Client Port] for a connection initiated by the mobile computer.

If you want to delete the registry of a server or client port, select a Port Name from the list and

tap [Deregister Serial Port].

UNPAIR DEVICES

To unpair with a device from the paired device list, select the device and tap [Delete Device].

Note: The mobile computer must be unpaired on the remote device as well. (Both devices must be

unpaired!)

4.2.4 BLUETOOTH ACTIVESYNC

The connection of ActiveSync via Bluetooth must be initiated from the mobile computer.

Reference Manual

Table of Contents