Epson WorkForce 1100 Service Manual page 114

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
 Align the positioning holes on the Main Frame with the guide
pins on the Front Paper Guide.
Figure 4-131. Reinstalling the Front Paper Guide
 After installing the Front Paper Guide, lift the Printer
Mechanism to check the following points.
1. Make sure that the tabs on the Paper Guide Pad are not cut
midway.
2. Make sure that all the tabs are facing down (toward the Waste
Ink Pads) without any folds.
3. Make sure that the tab foldbacks are protruding completely
from the Front Paper Guide.
Tabs
Figure 4-132. Checking the Front Paper Guide Pad
Disassembly And Assembly
Guide pins
Tabs
Tabs
Disassembling the Printer Mechanism
After replacing the following parts, be sure to apply G-45 grease to the
A D J U S T M E N T
R E Q U I R E D
area specified for each part.
 EJ Grounding Spring:
 Front Paper Guide and Paper EJ Roller:
page 157.
After replacing or removing the Front Paper Guide and Paper EJ
A D J U S T M E N T
R E Q U I R E D
Roller, always make the required adjustments referring to the
following.
 "Chapter 5
Adjustment
Revision C
See Figure 6-8 on page 157.
See Figure 6-9 on
(p.128)"
Confidential
114