Upper Housing Support Assy - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
After replacing the following parts, be sure to apply G-26 grease to the
A D J U S T M E N T
R E Q U I R E D
area specified for each part.
 Printer Cover Holder Left: Chapter 6
 Printer Cover Holder Right: Chapter 6
Disassembly And Assembly

4.2.8 Upper Housing Support Assy

1.
See Figure 6-13 (p.158).
2.
See Figure 6-13 (p.158).
Removing the Housings
Remove the Upper Housing / Printer Cover. (p.72)
Remove the two C.B.S. M3 x 6 screws and two C.B.P. M3 x 10 screws that secure
the Upper Housing Support Assy, and remove the Upper Housing Support Assy.
1) C.B.P. M3x10
(6±1 kgf.cm)
2) C.B.S. M3x6
(6±1 kgf.cm)
Upper Housing Support Assy
Figure 4-19. Removing the Upper Housing Support Assy
Secure the Grounding Plate with one of the C.B.S. M3 x 6 screws
together with the Upper Housing as shown below.
Revision C
1) C.B.P. M3x10
(6±1 kgf.cm)
74
Confidential