Epson WorkForce 1100 Service Manual page 102

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
4. Detach the extension spring from the tab of the Retard Roller Assy, and remove
the Retard Roller Assy from the ASF Assy.
Tab
Figure 4-95. Removing the Retard Roller Assy (2)
 Insert the two shafts of the Retard Roller Assy to the two holes
of the ASF Assy.
Figure 4-96. Reinstalling the Retard Roller Assy
Disassembly And Assembly
Retard Roller Assy
Extension spring
Shafts and Holes
Retard Roller Assy
Disassembling the Printer Mechanism
 See below for installing the torsion spring of the Paper Back
Lever Right.
Inside
Put the spring leg through
the hole of ASF Assy.
Figure 4-97. Reinstalling the Torsion Spring
Revision C
Torsion spring
Torsion spring
Attach the spring leg on the
Paper Back Lever Right.
102
Confidential