Disassembling The Printer Mechanism; Removing The Printer Mechanism - Epson Stylus Photo R280 Service Manual

Epson Stylus Photo R280/R285/R290/Epson Artisan 50/Epson Stylus Photo T50/T59/T60/P50

4.4 Disassembling the Printer Mechanism

4.4.1 Removing the Printer Mechanism

Parts/Components need to be removed in advance
Printer Cover / Paper Support Assy / Upper Housing / Main Board Unit / Panel Assy /
Cover Open Sensor
Removal procedure
Be careful of the four sharp edges shown in the figure below
C A U T I O N
when assembling or reassembling.
Printer Mechanism Handling Precaution
When lifting the printer, hold
below to prevent the frame from deforming.
Figure 4-35. Printer Mechanism Handling Precaution (1)
Chapter 4 Disassembly/Assembly
parts shown in the figure
Sharp Edge
4.4.1 Removing the Printer Mechanism (Disassembling the Printer Mechanism)
Do not touch the PF Scale with bare hands or damage it.
C A U T I O N
If the Printer Mechanism is tilted leftward about 15°, the PF
Scale hits against the desk surface and can break. After
removing the Printer Mechanism, take extra care to protect
the PF Scale.
Figure 4-36. Printer Mechanism Handling Precaution (2)
1. Disengage the hook of the Ink Tube Cover using a flathead screwdriver and
remove the Ink Tube Cover.
Ribs
Ink Tube Cover
Hook
Figure 4-37. Removing the Ink Tube Cover
Revision C
About
15°
Do not tilt more than 15
degrees, or drag it while tilting.
72
Confidential