Epson WorkForce 1100 Service Manual page 85

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
 The Printhead must be installed with its positioning holes
aligned with the guide pins of the Carriage Unit.
Figure 4-49. Reinstalling the Printhead (1)
 Route the CSIC FFC through the groove of the Carriage Unit.
Groove
Figure 4-50. Reinstalling the CSIC FFC
Disassembly And Assembly
Guide pins
Positioning holes
CSIC FFC
Disassembling the Printer Mechanism
 Tighten the screws in the order shown in
After replacing or removing the Printhead, always make the required
A D J U S T M E N T
R E Q U I R E D
adjustments referring to the following.
 "Chapter 5
Adjustment
Revision C
Figure 4-46
(p.128)"
85
Confidential