Cover Open Sensor - Epson WorkForce 1100 Service Manual

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
Align the four tabs and guide pin on the PE Sensor Holder with the
positioning holes on the Main Frame correctly so that there is no
gap between the PE Sensor Holder and the Main Frame.
Figure 4-164. Reinstalling the PE Sensor
Disassembly And Assembly
Tabs
Guide pin
Guide
Removing the Sensors

4.6.5 Cover Open Sensor

1. Remove the Panel Unit. (p.69)
2. Remove the C.B.P. M3x10 screw that secures the Cover Open Sensor and remove
the Cover Open Sensor.
Cover Open Sensor
1) C.B.P. M3x10
Guide pins and
(6±1 kgf.cm)
Positioning holes
Figure 4-165. Removing the Cover Open Sensor
Align the guide pins with the positioning holes shown in
4-165.
Revision C
Figure
127
Confidential