Disassembling The Printer Mechanism; Removing The Printer Mechanism - Epson L800 Service Manual

L800/L801

1.5 Disassembling the Printer Mechanism

1.5.1 Removing the Printer Mechanism

¸ Removal procedure
̈
Be careful of the four sharp edges shown in the figure below
C A U T I O N
when assembling or reassembling.
̈
Printer Mechanism Handling Precaution
When lifting the printer, hold
below to prevent the frame from deforming.
Figure 1-41. Printer Mechanism Handling Precaution (1)
Disassembly/Reassembly
Downloaded from www.Manualslib.com
parts shown in the figure
Sharp Edge
Removing the Printer Mechanism
manuals search engine
̈
Do not touch the PF Scale with bare hands or damage it.
C A U T I O N
̈
If the Printer Mechanism is tilted leftward about 15°, the PF
Scale hits against the desk surface and can break. After
removing the Printer Mechanism, take extra care to protect
the PF Scale.
Figure 1-42. Printer Mechanism Handling Precaution (2)
̈
When removing the Waste Ink Tube, take care not to
contaminate the printer and surroundings with ink.
̈
Extra care must be exercised not to scratch or damage the
Waste Ink Tube.
1. Pull out the Waste Ink Tube by hand.
Waste Ink Tube
Figure 1-43. Removing the Waste Ink Tube
Revision A
About
15°
Do not tilt more than 15
degrees, or drag it while tilting.
35
Confidential