Epson WorkForce 1100 Service Manual page 113

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
 Engage the two tabs of the Front Paper Guide Pad Tray with
the holes of the Front Paper Guide as shown in
 Install the Waste Ink Pad A, B and C in the order shown below.
Step1
Waste Ink Pad C
Step2
Step3
Figure 4-127. Reinstalling the Waste Ink Pads
 When installing the Waste Ink Pads, make sure not to let the tab
of the Front Paper Guide get caught between the Front Paper
Guide Pad Tray Cover Assy and the Front Paper Guide.
 Confirm that the tab of the Front Paper Guide Pad touches the
Waste Ink Pad A.
Waste Ink Pad A
Figure 4-128. Reinstalling the Front Paper Guide Pad Tray
Disassembly And Assembly
Figure 4-125.
Front Paper Guide Pad Tray
Waste Ink Pad B
Waste Ink Pad A
Front Paper Guide Pad
Tab
Tray Cover Assy
Disassembling the Printer Mechanism
 Do not peel off the Front Paper Guide Pad Tray Seal from the
Front Paper Guide Pad Tray Cover Assy. If it is used after once
peeled off or damaged, ink leakage may occur. Make sure to
replace the Front Paper Guide Pad Tray Cover Assy with a new
one when the seal is peeled off or damaged.
Front Paper Guide Pad
Back side
Tray Seal
Figure 4-129. Handling for Front Paper Guide Pad Tray Seal

Align the bushing of the Front Paper Guide with the PF Roller
Shaft.
Shaft and bushing
Figure 4-130. The PF Roller Shaft and the bushing of the Front
Paper Guide
Revision C
Front Paper Guide Pad
Tray Cover Assy
113
Confidential