Epson WorkForce 1100 Service Manual page 54

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
Observed Faults Details of the Fault
Horizontal or vertical Although inks are ejected from
banding / Getting the Print Head to the Cap, the
smeared trouble still occurs after
executing a cleaning cycle or
replacing the Ink Cartridges.
Troubleshooting
Table 3-12. Print Quality Troubles
Faulty Part/
Part Name
Head FFC 3. Check the Head FFC for damages.
Print Head 1. Check if the print quality recovers after running a cleaning or
replacing the Ink Cartridges.
Main Board 1. Check the Main Board for damages.
Overview
Check Point
Revision C
Remedy
3. Replace the Head FFC with a new one. If the
trouble still occurs after replacing it, replace the
Print Head with a new one.
1. Run the cleaning and replace the Ink Cartridges
several times. If the trouble still occurs, replace
the Print Head with a new one.
1. Replace the Main Board with a new one.
Confidential
54