Epson WorkForce 1100 Service Manual page 98

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
Align the guide pins and tabs on the Guide Roller LDs with the
positioning holes on the Main Frame.
11. Remove the three C.B.S. (P4) M3 x 8 screws that secure the ASF Assy, and
remove the ASF Assy from the Printer Mechanism.
ASF Assy
1
6) C.B.S. (P4) M3x8
(6±1 kgf.cm)
2
Figure 4-86. Removing the ASF Assy
Disassembly And Assembly
(Refer to Figure 4-85.)
6) C.B.S. (P4) M3x8
(6±1 kgf.cm)
34
Disassembling the Printer Mechanism
 Align the guide pin and four Tabs on the ASF Assy with the
positioning holes on the Main Frame so that there is no gap
between the ASF Assy and the Main Frame.
Tab
Tab
Tab
Figure 4-87. Reinstalling the ASF Assy
 Tighten the screws in the order shown in
Revision C
Guide pins
Tab
Figure 4-86.
98
Confidential