Epson WorkForce 1100 Service Manual page 38

WorkForce 1100/Epson Stylus Office T1110/B1100/T1100/Epson ME Office 1100
Occurrence
Phenomenon Detail
Timing
Any time During manual double-sided
printing, multiple sheets are fed
at a time.
Occurrence
Phenomenon Detail
Timing
At operation or A message is displayed on the
during printing LED and STM3 during printing.
Occurrence
Phenomenon Detail
Timing
During printing After the Carriage has detected
the HP, an error is displayed on
the LED and STM3.
Troubleshooting
Table 3-6. Troubleshooting of Multi-feed error
Faulty Part/Part
Name
ASF Assy 1. Check that the Retard Roller Assy is moving properly during the
feeding operation.
Bottom of
the ASF Assy
Retard Roller
Assy
ASF Assy
2. Check that the position of the ASF Guide Roller LDs has been
adjusted correctly.
Table 3-7. Troubleshooting of Ink Low
Faulty Part/Part
Name
Ink Cartridge 1. Look at the remaining ink indication of the STM3 to check the
amount of the ink remaining in the Ink Cartridge.
Table 3-8. Troubleshooting of Ink Out Error
Faulty Part/Part
Name
Ink Cartridge 1. Look at the remaining ink indication of the STM3 to check
whether the ink remains in the Ink Cartridge.
Overview
Check Point
Extension Spring
Check Point
Check Point
Revision C
Remedy
1. Attach the Extension Spring on the back side
of the Retard Roller Assy correctly.
Refer to Chapter 4 Retard Roller Assy
(P.101).
2. Adjust the position of the ASF Guide Roller
LDs.
Refer to Chapter 4 ASF Assy (P.96).
Remedy
1. Prepare a new Ink Cartridge.
Remedy
1. Replace the Ink Cartridge with a new one.
Confidential
38