[G] Switching regulator unit
(1)
Take off the rear cover-2 (
cover-2").
(2)
Take off the LGC board cover (
LGC board (LGC)").
(3)
Take off the SYS board cover (
HDD cooling fan (M21)").
(4)
Loosen 2 screws and take off the PS cover.
(5)
Disconnect 8 connectors.
(6)
Remove 1 harness clamp. Release the har-
ness from 1 harness clamp. Remove 3
screws and take off the switching regulator
unit while the unit is inclined.
June 2005 © TOSHIBA TEC
P.2-32 "[S] Rear
P.2-37 "[E]
P.2-33 "[A]
Switching regulator
unit
2 - 39
Fig.2-60
Fig.2-61
Fig.2-62
e-STUDIO281c/351c/451c OUTLINE OF THE MACHINE
2