Toshiba e-STUDIO281c Service Manual page 55

(3) Disconnect 4 connectors. Remove 2 harness
clamps.
(4) Remove 8 screws, and then take off 2 leaf
springs and the SYS board.
[D] SYS board case
(1) Take off the rear cover-2 (
cover-2").
(2) Take off the right rear cover (
Right rear cover").
(3) Take off the SYS board cover (
HDD cooling fan (M21)").
(4) Loosen 2 screws and take off the PS cover.
June 2005 © TOSHIBA TEC
P.2-32 "[S] Rear
P.2-30 "[O]
P.2-33 "[A]
2 - 35
Fig.2-49
Fig.2-50
PS cover
e-STUDIO281c/351c/451c OUTLINE OF THE MACHINE
Leaf spring
2