Toshiba e-STUDIO281c Service Manual page 52

(2) Remove 2 screws and take off the rear
cover-1.
[S] Rear cover-2
(1) Take off the rear cover-1 (
Rear cover-1").
(2) Remove 3 screws and take off the rear
cover-2.
Note:
Disconnect the connector of the RADF first
when the RADF is installed.
[T] Upper rear cover
(1) Take off the RADF or the platen cover.
(2) Take off the left rear cover (
Left rear cover").
(3) Take off the right rear cover (
Right rear cover").
(4) Remove 2 screws and take off the upper rear
cover.
e-STUDIO281c/351c/451c OUTLINE OF THE MACHINE
P.2-31 "[R]
P.2-29 "[M]
Upper rear cover
P.2-30 "[O]
2 - 32
Rear cover-1
Fig.2-40
Rear cover-2
Fig.2-41
Fig.2-42
June 2005 © TOSHIBA TEC