Toshiba e-STUDIO281c Service Manual page 264

[L] Discharge LED (ERS)
(1) Take off the process unit
( P.11-10 "[B] Process unit").
(2) Remove 2 screws and lift up the discharge
LED unit.
(3) Disconnect 2 connectors and take off the dis-
charge LED unit.
(4) Disconnect 1 connector and take off the dis-
charge LED.
[M] Charger cleaner motor (M13)
(1) Disconnect 2 connectors and remove 1
screw. Then take off the charger cleaner
motor unit.
e-STUDIO281c/351c/451c DRUM RELATED SECTION
Discharge LED unit
Screw Screw
Discharge LED
Charger cleaner
motor unit
11 - 20
Fig.11-36
Fig.11-37
Fig.11-38
June 2005 © TOSHIBA TEC