Toshiba e-STUDIO281c Service Manual page 327

Hide thumbs Also See for e-STUDIO281c:

Table of Contents

Transfer belt home position sensor-2 (S16)

Take off the transfer belt

P.14-10 "[B] Transfer belt").

Remove 1 screw and take off the cover.

Disconnect 1 connector and remove 1 screw.

Then take off the transfer belt home position

Take off the process unit

P.11-10 "[B] Process unit").

Loosen 1 screw and take off the drum stay.

Transfer belt

home position sensor-2

e-STUDIO281c/351c/451c TRANSFER UNIT

E-studio351c E-studio451c