Toshiba e-STUDIO281c Service Manual page 400

The followings are two output channels which are linked with the cover switch.
1) +5.1V
+5.1VD:
2) +24V
+24VD1:
+24VD1:
+24VD1:
+24VD2:
+24VD3:
+24VD4:
+24VD5:
Output voltage by the type of connector
Main switch line
Connector
CN464 SYS board
CN466 LGC board, PFP/LCF (via LGC board),
Bridge unit (via LGC board)
CN467 SLG board, RADF
CN468 Finisher
CN469 FIL board
CN471 FAX unit
Cover switch line
Connector
CN465 LGC board, DRV board, PFP/LCF (via LGC
board), Bridge unit (via LGC board)
CN466 LGC board
CN467 SLG board, RADF
CN468 Finisher
CN469 PFP/LCF
CN470 Power supply cooling fan
e-STUDIO281c/351c/451c POWER SUPPLY UNIT
CN466 Pin 11
Output to the LGC board
CN465 Pins 1 and 2
Output to the LGC board, Bridge unit (via LGC board)
CN469 Pins 1 and 2
Output to the PFP/LCF
CN470 Pin 1
Output to the power supply cooling fan
CN465 Pins 5 and 6
Output to the DRV board
CN467 Pins 1 and 2
Output to the RADF
CN467 Pins 10, 12 and 14
Output to the SLG board
CN468 Pin 2
Output to the finisher
Destination
Destination
+3.3VA, +3.3VB, +5.1VA, +5.1VB, +12VA,
+12VB
+3.3VB, +5.1VB, +12VB
+3.3VB, 5.1VB
+5.1VB
+5.1VB
+12VB
+24VD1, +24VD2
+5.1VD
+24VD3, +24VD4
+24VD5
+24VD1
+24VD1
18 - 4
Voltage
Voltage
June 2005 © TOSHIBA TEC