Toshiba e-STUDIO281c Service Manual page 170

[K] SLG board (SLG)
(1) Take off the lens cover.
( P.6-17 "[B] Lens cover")
(2) Disconnect 8 connectors, remove 6 screws
and take off the SLG board.
[L] Scanner unit cooling fan (M15)
(1) Take off the upper rear cover.
( P.2-32 "[T] Upper rear cover")
(2) Disconnect 1 connector. Release the har-
ness from the harness clamp. Remove 2
screws and take off the scanner unit cooling
fan.
e-STUDIO281c/351c/451c SCANNER
SLG board
Scanner unit cooling fan
6 - 26
Fig.6-43
Fig.6-44
June 2005 © TOSHIBA TEC